BW3

2023-05-17 16:28:39 来源：钢铁之家阅读量：0

牌号	BW3
对应标准	BS 3100-1991 一般工程用铸钢件 Specification for Steel castings for general engineering purposes
归类	铸钢
标签	耐磨合金铸钢

BW3 化学元素成分含量(%)

成分	C	Si	Mn	P	S	Cr	Mo
最小值	0.45	-	0.5	-	-	0.8	-
最大值	0.6	0.75	1	0.04	0.04	1.5	0.4

①碳含量每降低0.01%，最大锰含量则增加0.04%，允许最大锰含量到1.1%

碳当量计算

BW3 机械性能

热处理或状态	硬度 HBW
A或AH+T或OQ+T或WQ+T	≥293

A=for anneal by heating to a temperature above the AC3 and cool in the furnace
N=for normalize by heating to a temperature above the AC3 and cool in still air
OQ=for quench into oil from a temperature above the AC3
WQ=for quench into water from a temperature above the AC3
AH=for air harden by heating to a temperature above the AC3 and cool in air at a rate fast enough to produce a hardened microstructure
T=for temper by heating to a temperature below AC1
ST=for solution treat by heating to temperature high enough to dissolve and any intermetallic phases followed by a rapid cool.

表中值不适用于退火状态铸件

注：本资料来源于互联网的公开资源整理，我们不保证这些资料的准确性、完整性和适用性。这些资料仅供您参考，不应用于任何商业用途或决策依据。本资料所记载的技术信息是说明产品的代表性特点和性能的参考值，对于因误用或不当使用本资料所记载的信息等而造成的损害恕难承担责任，敬请周知。

上一篇：1.0501
下一篇：ZG40Cr25Ni12Si2