B861 Grade 23

2023-05-17 15:43:48 来源：钢铁之家阅读量：0

牌号	B861 Grade 23
美国UNS	R56407
对应标准	ASTM B861-2019 钛及钛合金无缝管 Titanium and Titanium Alloy Seamless Pipe
归类	钛及钛合金

B861 Grade 23 化学元素成分含量(%)

成分	Fe	C	N	V	Al	H	O	其他单个	其他合计	更多
最小值	-	-	-	3.5	5.5	-	-	-	-	Ti:余量
最大值	0.25	0.08	0.03	4.5	6.5	0.0125	0.13	0.1	0.4	Ti:余量

其他单个或其他合计化学成分包括表中未指定值的化学成分。只有在假定存在或在常规分析中，且有迹象表明其成分将超过规定值的情况下，才应进行分析。

① At minimum, the analysis of samples from the top and bottom of the ingot shall be completed and reported for all elements listed for the respective grade in this table.
② Final product hydrogen shall be reported. Ingot hydrogen need not be reported. Lower hydrogen may be obtained by negotiation with the manufacturer.
③ Single values are maximum. The percentage of titanium is determined by difference.
④ Other elements need not be reported unless the concentration level is greater than 0.1 % each, or 0.4 % total. Other elements may not be added intentionally. Other elements may be present in titanium or titanium
alloys in small quantities and are inherent to the manufacturing process. In titanium these elements typically include aluminum, vanadium, tin, chromium, molybdenum, niobium, zirconium, hafnium, bismuth, ruthenium,
palladium, yttrium, copper, silicon, cobalt, tantalum, nickel, boron, manganese, and tungsten.
⑤ The purchaser may, in the written purchase order, request analysis for specific elements not listed in this specification.

B861 Grade 23 机械性能

抗拉强度 σ_b Mpa	屈服点 σ_s Mpa	断后伸长率或延伸率 δ %
≥828	≥759	≥10

*Properties for annealed condition except as noted.

注：本资料来源于互联网的公开资源整理，我们不保证这些资料的准确性、完整性和适用性。这些资料仅供您参考，不应用于任何商业用途或决策依据。本资料所记载的技术信息是说明产品的代表性特点和性能的参考值，对于因误用或不当使用本资料所记载的信息等而造成的损害恕难承担责任，敬请周知。